这是我在苹果论坛找到的一个方法， 没敢尝试呢， 因为里面没有说会不会丢失data或者导致页ipad 转到 factory setting. The remedy is quiet simple, follow these steps to get the ipad to home screen to power it down so it has sufficient time to charge up and boot normally and get off the endless loop. Plug into wall socket to get it charging. Wait until the apple logo appears and wants to boot up. QUICKLY hold down home button and reset/ sleep button at the same time until it reboots. Release buttons now. should now power down and reboot Repeat step 3 at least 30 to 40 times which is about 10 minutes in duration everytime you see the logo appear on the screen. Now Let IPad boot up fully, should see home screen with about 2% battery life QUICKLY hit the rest/ sleep button down for about 2 to 5 seconds. Swipe the screen to when slider appears to switch off the ipad. This will now power down the IPad which now will not reboot by itself so it can now charge without any interruption’s. Allow battery to charge for a least an hour or two without trying to put it on. Switch the IPad on You should now have about 10 to 20% battery Life Power it down again by holding the reset/ Sleep button down again and swipe the screen to power down, let it charge fully to 100% now which will take few hours Enjoy your IPad again 🙂 🙂 Lesson learnt. When your battery power is low, dont wait for it drain completely, rather power the pad down manually and let it charge when there is only about 2 to 4% battery life left.
可以试试 Connect the iPad to the computer > Open File Explorer > Open the iPad device under This PC > Open DCIM folder, copy the pictures and paste on the folder you want to place them
The remedy is quiet simple, follow these steps to get the ipad to home screen to power it down so it has sufficient time to charge up and boot normally and get off the endless loop.
Plug into wall socket to get it charging. Wait until the apple logo appears and wants to boot up. QUICKLY hold down home button and reset/ sleep button at the same time until it reboots. Release buttons now. should now power down and reboot Repeat step 3 at least 30 to 40 times which is about 10 minutes in duration everytime you see the logo appear on the screen. Now Let IPad boot up fully, should see home screen with about 2% battery life QUICKLY hit the rest/ sleep button down for about 2 to 5 seconds. Swipe the screen to when slider appears to switch off the ipad. This will now power down the IPad which now will not reboot by itself so it can now charge without any interruption’s. Allow battery to charge for a least an hour or two without trying to put it on. Switch the IPad on You should now have about 10 to 20% battery Life Power it down again by holding the reset/ Sleep button down again and swipe the screen to power down, let it charge fully to 100% now which will take few hours Enjoy your IPad again 🙂 🙂
Lesson learnt. When your battery power is low, dont wait for it drain completely, rather power the pad down manually and let it charge when there is only about 2 to 4% battery life left.
谢谢， 这个我试过了， 还是开不了
那有點玄。boot loop 很大可能是某個重要零件脫焊 (接點跟電路板接觸不良)，你可以試試放冰箱，或是稍微扭一扭平板希望它能暫時工作一下，然後趕快備份。
系统提示：若遇到视频无法播放请点击下方链接
https://www.youtube.com/embed/gIRqD8-KDjw?si=oUgP2ZM0yTPYFhOH
谢谢妹妹提供这个视频，用这里的第二个和第三个方法进入 recovery mode会导致丢失data（照片）吗？还没敢进入recovery mode.
我理解Recover mode是刷新一切
我也是这样理解的， 所以迟迟不敢动手试，就怕进入recovery mode就全部刷新照片啥也不剩了，唉
忘记哪版了， 我20年买的